Insulator Composite Suspension Type 15 Kv, Clevis 52-1, 70kn.

• Application: High-voltage, Low-voltage, High-temperature
• Material: Composite Polymer
• Structure: Suspension Insulator
• Type: A Type Insulator
• Usage: High Voltage Power Transmission
• Connection Method: Trough Type
• Model NO.: 52-1
• Size of Bearing Capacity: 70KN
• Certification: ISO9001, IEC IEEE
• Color: Grey
• Brand: Oei Power
• Transport Package: Cartons Pallets Wooden Case
• Specification: IEC IEEE
• Trademark: OEIpower
• Origin: China Nanyang
• HS Code: 854690000
• Production Capacity: 100000

Product Description

The Composite Insulators comply with the latest editions of and amendments to, the standards/specification listed below:

5	Name of the material		Herringbone type porcelain insulator  24.9 kV, thread 1-3 / 8 ", ANSI 56-1.
6	Isolating material		Porcelain
7	ANSI class 56-1		Printed under the varnish of the insulator
8	Colored enamel		Gray according to ANSI 70 standard
9	Applied standards		ANSI C29.1, ANSI C 29.5
10	Quality certificate		ISO 9001 or recent
11	Finished		The entire surface of the insulator should be  smooth and free of imperfections
12	Identification mark		Printed under form isolator varnish  Legible and indelible name of the manufacturer, country of origin, Class 56-, year of Manufacture
	Dimensional characteristics
13	Distance from Fuga	inch(mm)	≥13(330.2)
14	Arc distance	inch(mm)	7(177.8)
15	Width of the insulating base	inch(mm)	7-1/2(190.50)
16	Width of the cusp	inch(mm)	4 -5/8(117.47)
17	Minimum height of the insulator	inch(mm)	5-3/4(146.05)
18	Diameter of the Thread	inch(mm)	1-3/8(34.92)
19	Thread length of the insulator	inch(mm)	2-1/8(53.97)
20	Weight Approx.	kg(lb)	3.19(7.03)
	Mechanical characteristics
21	Electromechanical resistance	kN(lbs)	11(2500)
	Electrical characteristics
22	Dry contour tension to 60  HZ	kV	≥70
23	Wet contour tension to  60 HZ	kV	≥40
24	Critical tension type impulse- Positive	kV	≥110
25	Critical tension type impulse- Negative	kV	≥140
26	Disturbance voltage at low  frequency	kV	95
	Characteristics to Radioifluencia
27	RMS test voltage to ground	kV	15
28	Maximun RIV at 1000 k HZ	µv	8000
29	Packaging		The insulators should be packaged wooden fittings  highly resistant for your  transportation, storage and handling

 
CSA                                   CANADIAN STANDARDS ASSOCIATION
 
G164-4                        -       Hot dip galvanizing of Irregular Shaped Articles
 
CAN/CSA                  -       Quality Assurance Program Categories 2299.3
 
ANSI                           -      AMERICAN NATIONAL STANDARDS INSTITUTE
 
C29.1                           -      American Standard Test Method For Electrical Power Insulators
 
C29.7                           -      American Standard For Wet-processed Porcelain Insulators (High Voltage Line Post Type) Electrical Power Insulators
 
987-1985                     -       IEEE Guide For Application of Composite Insulators
 
D750                            -      Recommended Practice for Operating Light and Weather Exposure Apparatus (Carbon Arc Type) For Artificial Weather Testing Of Rubber Compounds.

 

5	Class		ANSI 52-1, Printed under the insulator
6	Name of the material		Composite Insulator Type Suspension 13.2  kV, Clevis 52-1.70 kN.
7	Envelope material		Polymer rubber silicone rubber with high hydrobicity and resistance to U.V.  EPDM or derivatives and / or combinations are not accepted
8	Core Material		Hydrophobic glass fiber bar type E or ECR and hydrophobic resin
9	The interface between the core of the insulator and the cladding will be made  following a union process		Bonding by epoxy glue or chemical paste will not be accepted.  no crosslinked EPM
10	Steel		Galvanized steel in immersion in  hot
11	Applicable standards		ANSI C29.1, ANSIB.1.1, ANSI / ASM 18, IEC 61109, ASTMA153
12	Certificate		ISO 9001 or recent
13	Color		Gray according to ANSI standard
14	Identification mark		You must present the engraving in the bar  Brand, ANSI 52-1 class, resistance
15	Insulator length	inch(mm)	13(330)
16	Line of flight	inch(mm)	≥16-1/7(410)
17	Dry contour length	inch(mm)	7 ½(190)
18	Weight	kg(lbs)	1(2.3)
19	Quantity of bells	u	4 a 6
	Electrical characteristic
20	Frequency contour voltage in  dry at 60 HZ	kV	95
21	Low frequency flare voltage  rain	kV	80
22	Critical stress to positive impulse contour	kV	140
23	Critical stress to impulse contour  negative	kV	145
	Mechanical characteristic
24	SML mechanical load	kN(lbs)	70(15000)
25	RTL routine load	kN(lbs)	35(7500)
	Radio characteristic
26	Test Voltage	kV	15
27	Max. 1 MHz disturbance level	μV	<10
28	Coupling standard		CLEVIS S/N ANSI C29.2 52-1

D1499                          -      Recommended Practice For Exposure of Plastics.
 

4	Year of manufacture		Specify data
5	Name of the material		Spiral type 13.2kV porcelain insulator, 1 "thread, ANSI 55-4.
6	Insulation raw material		Porcelain
7	Class ANSI 55-4		Printed under the varnish of the insulator
8	Gray color enamel		ANSI 70 standard
	Standards
9	Applied standards		ANSIC29.1, ANSI C29-5
10	Quality certificate		ISO 9001a recent
11	Finished		The entire surface of the insulator should be  smooth and free of imperfections
12	Identification mark		Printed under the varnish of the insulator in a legible and indelible way Manufacturer, Country of origin, Class 55-4.
	Dimensional characteristics
13	Distance from Fuga	inch(mm)	9(228)
14	Arc distance	inch(mm)	5(127)
15	Width of the insulating base	inch(mm)	5.5(139.70)
16	Width of the cusp	inch(mm)	≥4(101.60)
17	Insulator height	inch(mm)	≥4-3/8(111.25)
18	Thread Diameter	inch(mm)	1(25.40)
19	Thread length of the insulator	inch(mm)	1-3/4(44.45) a 2(50.4)
20	Weight Approx.	kG(lb)	1.63(3.6)
	Mechanical characteristics
21	Electromechanical resistance	kN(Lbs)	≥13(3,000)
	Electrical characteristics
22	Dry contour tension to 60  HZ	kV	≥70
23	Wet contour tension to  60 HZ	kV	≥40
24	Critical tension type impulse- Positive	kV	≥110
25	Critical tension type impulse- Negative	kV	≥140
26	Frequency drilling voltage	kV	95
27	Maximun RIV at 1000 k HZ	µv	5,500
28	Packaging		"The insulators should be packaged wooden fittings highly resistant for your transportation, storage and handling "

 
D2240                          -      Rubber Properties, Durometer Hardness
 
D2565                          -      Recommended Practice For Operating Xenon-Arc Light And Water Exposure Apparatus Plastics.
The weathershed of the Post Insulators shall be manufactured from either Hydrated Alumina Ethylene Propylene Copolymer (EPM) as the primary constituent or Silicone Elastomers. The weathershead shall be injection moulded and brought to final cure state in one continuous process to prevent internal undercure or surface overcure. Additionally, the weathershead shall provide hydrophobic surface, even after exposure to tropical marine environment, ultra violent rays and moisture.
Core
 

5	Name of the material		"Reel porcelain insulator 3 "x 3-1 / 8", hole 1/16 ", ANSI 53-2 "
6	Isolating material		Porcelain
7	Enamel Color		Gray according to ANSI 70
8	Class ANSI 53-2		Printed on the insulator
9	Standards		ANSI C29.3
10	Quality certificate		ISO-9001 or recent
11	Finished		The surface of the insulator at the end of the process should be smooth and free of  defects.
12	Identification mark		Printed under the varnish of the insulator legibly and indelibly  manufacturer, country of origin, Class  ANSI 53-2
	Dimensional characteristics
13	Insulator height	inch(mm)	3(76.2)
14	External diameter	inch(mm)	3 1/9(79)
15	Inside diameter	inch(mm)	17/24(18)
16	Diameter of the neck	inch(mm)	1 71/92(45)
17	Weight	kg	0.51(1.22)
	Electrical characteristics
18	Low to low frequency contouring voltage at 60 HZ		25
19	Contour voltage at industrial frequency under horizontal		15
20	Voltage of contour to industrial frequency under vertical rain		12
	Mechanical characteristics
21	Transverse Mechanical Resistance	kN(lbs)	13.3(2989)
22	Packaging		"The insulators should be packaged wooden fittings highly resistant for your transportation, storage and handling "

The rod or the core is manufactured from Fibreglass, having 70-75 by weight of auxiliary aligned glass fibre bonded by an organic resin. The rod is either be cast or pultruded.
The end fittings are have the following properties:
 
i.          are compressed onto the Fibreglass rod member
ii.         are  not move relative to the central Fibreglass rod at applied loads equal to two times the rated Routine Test Load or maximum designed cantilever loads
iii.        are attracted to the rod after completion of all external heat processes used to cure or bond component parts.
 
The insulator are  provided load limiting bases that will deform under longitudinal loading of more than 100% of the rated design cantilever load. 
Performance Characteristics
 
The Polymeric Insulators are meet the under listed performance characteristics.
 

ITEM	11kV	33KV
Dry Flashover Withstand	90kV	180kV
Wet flashover withstand	70kV	165kV
Positive Impulse Critical flashover	145kV	300kV
Maximum Radio Interference Voltage	Below 1micro volt	Below 1 micro volt
Design Tension Strength	100kN	100kN
Residual Strength after Power Arc	80kN	80kN
Mechanical Proof Test Load	45kN	45kN
Maximum Sustained Load	34kN	34kN
Design Torque Rating	83 Nm	83 Nm

 
 
The insulator are suitable for accepting both aluminium and copper conductors having cross-sectional areas ranging from 35mm² to 265mm². The insulators are designed for mounting on the angle and channel crossarms specified in Specification E14
 
All exposed ferrous part shall be treated against corrosion. Treatment by hot dip galvanizing is preferable.