Base Accessory for Compression Retention

• Customization: Available
• Transport Package: Cartons Pallets Wooden Case
• Specification: IEC IEEE
• Trademark: OEIpower
• Origin: China Nanyang
• HS Code: 73269090
• Production Capacity: 100000

Product Description

 The Fuse Cutout type OEI was developed to operate in overhead distribution systems rated at 11
kV to 38 kV grounded systems with 100 or 200 A nominal currents.




Especially designed to protect transformers, capacitors, cables or lines.
It is robust construction, made of rigorously tested material, will interrupt all faults under the
most severe conditions, maintaining mechanical and electric characteristics.
The inserts, hardware and structural bolts and nuts are made from heavy galvanized steel.
The Fuse Cutout type OEI can be applied on all three-phase system rated at or below the maximum
operational rating of the cutout.

	Simple clamp 8 "x 1-1 / 2" x 1/4 "
	Laminated structural steel
	The galvanization must be carried out once the operations of forging, casting, cutting, drilling, machining, etc., have been completed, as well as the cleaning of said products. The finished pieces must have a quality finish, uniform galvanized surface (without draining) reasonably smooth and without bubbles, excess material and areas without coatings, bubbles, salts, etc. The edges and holes clean of burrs and defects of cutting operation.
	Each piece of two-way clamps must be marked with the manufacturer's symbol or identification and the nominal use range, prior to the galvanization process.
inch(mm)	8(203.20)
inch(mm)	1 -1/2 (38.1)
inch(mm)	1/4 (6.35)
kg	1.54
	Formed by two parts, a front piece with central hole for the car bolt and the previous piece without central hole.
	Two 1/2 "x 6" machine bolts with their respective square nut and washer
kg	1.54

Product	D  Bracket
Test Items	Test Content	Test Result
		Sample 1	Sample  2	Sample  3	Sample 4	Sample 5	Remarks
Visual  Inspection	Crack	√	√	√	√	√	1)      Passed Mark"√" 2)  Not Passed Mark"×" Test Conclusion:
	Stoma Trachoma	√	√	√	√	√
	Fins	√	√	√	√	√
	Burr	√	√	√	√	√
Galvanizing thickness	μm	√	√	√	√	√	1)      Passed Mark"√" 2)      Not Passed Mark"×": Test Conclusion:
Mechanical Characteristics	Mechanical Load	√	√	√	√	√	1)Passed Mark"√" 2)Not Passed Mark"×" Test Conclusion:
Inspector	Date:  02. March,2011                        Approved: