Strain Clamps Clevis Pistol (GUN) ACSR 50mm2 Complete with 3 U-Bolts

• Customization: Available
• Technics: Welding
• Standard: GB
• Usage: Line Fittings
• Type: Link Fittings
• Transport Package: Carton
• Specification: copper aluminium
• Trademark: Oeipower
• Origin: China Nangyang
• HS Code: 73269090
• Production Capacity: 100000

Product Description

STRAIN CLAMPS CLEVIS PISTOL (GUN) ACSR 50MM2 COMPLETE
WITH 3 U-BOLTS
Cast steel hot dip galvanised
The minimum failing load shall be indelibly marked on
each Pistol clamp.


TYPE:APG-B4
NAME:Parallel groove clamp APG-B4
Specification
  Al 25-240mm²      Size 62*58mm   Double-bolts  Bolt M10*60  Weight 280g

3.6		The throat of the staple will present a diameter range				mm		26.42
3.7		Throat Suspension Clamp  support must have curvature, to allow an angle of entry and exit  from the driver,				º		30º
3.8		Suspension clips present a  breaking load				kg		11,340
3.9		Minimum weight of zinc deposited in the  hot galvanized steel				g/m²		915
3.10		Minimum weight of zinc deposited in  bolts, nuts and washers				g/m²		400
3.11		Dimensions and drawings				mm		yes
3.12		ASTM standards						ASTM 123/153

Material

Connector bodies made of corrosion resistant, high strength aluminum alloy 99.5
Bolts: DIN 933, steel 8.8, dacromet; Nut: DIN934, dacromet, pressed into lower part
Pressure pad: aluminum alloy; Spring washer: DIN127, steel
Conical washer/Spring washers: Steel, DIN6796 corrosion-protected, dacromet
 

4.3		The body material will be alloy of aluminum, bolts, washers and nuts of the fastening system of the staple will be hot dip galvanized forged steel						yes
4.3		ACSR 556 conductor diameter.  4MCM not including the rod				mm		23.54
4.5		Breaking load				kg
4.6		The compression type anchor clips  for the conductor must be supplied with a connection terminal that can be bolted						0° o 30°.
4.7		Weight of zinc deposited on steel				g/m²		915 g/m².
4.8		Zinc weight deposited on bolts, nuts and washers				g/m²		400 g/m².
4.9		Weight				kg
4.1		Dimensions and drawings						yes
4.11		ASTM standards						ASTM 123/153
4.12		Attach to the staple						Norma IEC 60471.

Stainless steel A2 bolts and nuts available according to order.
 

6.3		The construction material of the  splice must be aluminum and aluminum alloy must contain a maximum of 0.1% copper						yes
6.4		ACSR conductor section  556.4MCM				mm²		327.93
6.5		Length				m
6.6		Breaking load				kg
6.7		Repair splices for the  conductor must be preformed rods of the Armor Splice Full type  Tension."						yes
6.8		Each rod that forms the joint  must have a mark in its center with indelible ink						yes
6.9		Weight per unit				kg