| Customization: | Available |
|---|---|
| Technics: | Welding |
| Standard: | GB |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| 3.6 | The throat of the staple will present a diameter range |
mm | 26.42 | |||||||
| 3.7 | Throat Suspension Clamp support must have curvature, to allow an angle of entry and exit from the driver, |
º | 30º | |||||||
| 3.8 | Suspension clips present a breaking load |
kg | 11,340 | |||||||
| 3.9 | Minimum weight of zinc deposited in the hot galvanized steel |
g/m² | 915 | |||||||
| 3.10 | Minimum weight of zinc deposited in bolts, nuts and washers |
g/m² | 400 | |||||||
| 3.11 | Dimensions and drawings | mm | yes | |||||||
| 3.12 | ASTM standards | ASTM 123/153 | ||||||||
Material
Connector bodies made of corrosion resistant, high strength aluminum alloy 99.5
Bolts: DIN 933, steel 8.8, dacromet; Nut: DIN934, dacromet, pressed into lower part
Pressure pad: aluminum alloy; Spring washer: DIN127, steel
Conical washer/Spring washers: Steel, DIN6796 corrosion-protected, dacromet
| 3 | Catalog and manufacturer reference code | Specify code and attach technical catalog of the model proposed by the manufacturer | |
| 4 | Name of the material | Pletina stanchion 1-1 / 4 "x1 / 4" x28 " | |
| 5 | Material | Steel | |
| 7 | Finished | Galvanized in hot dip, manufactured in one piece free of cracking, free of defects, burrs | |
| 8 | Manufacturing standard | ASTM-A36, ASTM A36M,, ASTM- A123 ,ASTM A153 | |
| Overall dimensions | inch(mm) | 1 1/4 x 1/4 x 28(31.75 x 6.35 x 711.2) | |
| 9 | Length | inch(mm) | 28(711.2) |
| 10 | Thickness | inch(mm) | 1/4(6.35) |
| 11 | Width | inch(mm) | 1 1/4(31.75) |
| 12 | Dimension of holes in ends: to. Hole A (end towards crosshead) |
inch(mm) | 0.562(14.28) |
| 13 | Dimension of holes in ends: b. Hole B (end towards pole) |
inch(mm) | 0.437(11.11) |
| 14 | Weight | lbs | 2.15 |
| 15 | Identification mark | Each strut must present the engraved symbol of the manufacturer |
|
| 16 | Packaging | In a group of 25 units the struts of Plates should be tied at each end and then packed in a highly resistant cardboard box for transport, storage and handling. |
| 4.3 | The body material will be alloy of aluminum, bolts, washers and nuts of the fastening system of the staple will be hot dip galvanized forged steel |
yes | ||||||||
| 4.3 | ACSR 556 conductor diameter. 4MCM not including the rod |
mm | 23.54 | |||||||
| 4.5 | Breaking load | kg | ||||||||
| 4.6 | The compression type anchor clips for the conductor must be supplied with a connection terminal that can be bolted |
0° o 30°. | ||||||||
| 4.7 | Weight of zinc deposited on steel | g/m² | 915 g/m². | |||||||
| 4.8 | Zinc weight deposited on bolts, nuts and washers | g/m² | 400 g/m². | |||||||
| 4.9 | Weight | kg | ||||||||
| 4.1 | Dimensions and drawings | yes | ||||||||
| 4.11 | ASTM standards | ASTM 123/153 | ||||||||
| 4.12 | Attach to the staple | Norma IEC 60471. | ||||||||
Stainless steel A2 bolts and nuts available according to order.
| 6.3 | The construction material of the splice must be aluminum and aluminum alloy must contain a maximum of 0.1% copper |
yes | ||||||||
| 6.4 | ACSR conductor section 556.4MCM |
mm² | 327.93 | |||||||
| 6.5 | Length | m | ||||||||
| 6.6 | Breaking load | kg | ||||||||
| 6.7 | Repair splices for the conductor must be preformed rods of the Armor Splice Full type Tension." |
yes | ||||||||
| 6.8 | Each rod that forms the joint must have a mark in its center with indelible ink |
yes | ||||||||
| 6.9 | Weight per unit | kg | ||||||||
| 5 | Material | Steel | |
| 6 | Finished | Bolt all threads and nuts they should have smooth surfaces and free of splinters, which may affect their functionality After the galvanizing operation, a centrifugation operation will be carried out that helps to uniformize the zinc layer in all the threaded parts and eliminate excess zinc. The nuts must have been checked after hot-dip galvanizing according to ANSI / ASTM A153. |
|
| 7 | Norm | ASTM A153, ASTM A‐307, ANSI B18.1.2 |
|
| 8 | Quality certificate | ISO-9001 or recent | |
| 9 | Identification mark | Each bolt must present the symbol manufacturer |
|
| 10 | Packaging | Bolts must be packed in a box of wood to protect it in handling, storage and transport. Each box must indicate the name of the material , manufacturer and quantity |
|
| Dimension | |||
| 11 | Diameter | inch(mm) | 5/8 (15.87) |
| 12 | Long | inch(mm) | 18(457.2) |
| 13 | Minimum resistance | kg(lb) | 5,624(12,400) |
| 14 | Weight | lbs | 1.96 |
| 15 | accessories | Each bolt must include four (4) square nuts |
){kind=link}