Gold Member Since 2015
Audited Supplier

Polymer Insulator, Silicone Rubber Insulator, Composite Insulator manufacturer / supplier in China, offering 15kv Polymer Line Post Insulators Insulators, Yh10W-45, Sharp Head 45kv 10ka Surge Arrester, Yh5w-30, 30kv 5ka Surge Arrester and so on.

(/ )

Supplier Homepage Product Insulators Others Insulators 15kv Polymer Line Post Insulators Insulators

15kv Polymer Line Post Insulators Insulators

FOB Price: US $11 / Piece
Min. Order: 1 Piece
Min. Order FOB Price
1 Piece US $11/ Piece
Get Latest Price
Port: Shanghai, China
Production Capacity: 100000
Payment Terms: L/C, T/T, D/P

Request a custom order and have something just for you!

Send Customized Request
Basic Info
  • Application: High-voltage, Low-voltage, High-temperature
  • Structure: Suspension Insulator
  • Usage: High Voltage Power Transmission
  • Size of Bearing Capacity: 160KN
  • Color: Grey
  • Trademark: OEIpower
  • Specification: IEC IEEE
  • HS Code: 854690000
  • Material: Composite Polymer
  • Type: A Type Insulator
  • Connection Method: Trough Type
  • Certification: ISO9001, IEC IEEE
  • Brand: Oei Power
  • Transport Package: Cartons Pallets Wooden Case
  • Origin: China Nanyang
Product Description
The Composite Insulators comply with the latest editions of and amendments to, the standards/specification listed below:
CSA                                   CANADIAN STANDARDS ASSOCIATION
G164-4                        -       Hot dip galvanizing of Irregular Shaped Articles
CAN/CSA                  -       Quality Assurance Program Categories 2299.3
C29.1                           -      American Standard Test Method For Electrical Power Insulators
C29.7                           -      American Standard For Wet-processed Porcelain Insulators (High Voltage Line Post Type) Electrical Power Insulators
987-1985                     -       IEEE Guide For Application of Composite Insulators
D750                            -      Recommended Practice for Operating Light and Weather Exposure Apparatus (Carbon Arc Type) For Artificial Weather Testing Of Rubber Compounds.
D1499                          -      Recommended Practice For Exposure of Plastics.
D2240                          -      Rubber Properties, Durometer Hardness
D2565                          -      Recommended Practice For Operating Xenon-Arc Light And Water Exposure Apparatus Plastics.
The weathershed of the Post Insulators shall be manufactured from either Hydrated Alumina Ethylene Propylene Copolymer (EPM) as the primary constituent or Silicone Elastomers. The weathershead shall be injection moulded and brought to final cure state in one continuous process to prevent internal undercure or surface overcure. Additionally, the weathershead shall provide hydrophobic surface, even after exposure to tropical marine environment, ultra violent rays and moisture.
The rod or the core is manufactured from Fibreglass, having 70-75 by weight of auxiliary aligned glass fibre bonded by an organic resin. The rod is either be cast or pultruded.
The end fittings are have the following properties:
i.          are compressed onto the Fibreglass rod member
ii.         are  not move relative to the central Fibreglass rod at applied loads equal to two times the rated Routine Test Load or maximum designed cantilever loads
iii.        are attracted to the rod after completion of all external heat processes used to cure or bond component parts.
The insulator are  provided load limiting bases that will deform under longitudinal loading of more than 100% of the rated design cantilever load. 
Performance Characteristics
The Polymeric Insulators are meet the under listed performance characteristics.
Dry Flashover Withstand
Wet flashover withstand
Positive Impulse Critical flashover
Maximum Radio Interference Voltage
Below 1micro volt
   Below 1 micro volt         
Design Tension Strength
Residual Strength after Power Arc
Mechanical Proof Test Load
Maximum Sustained Load
Design Torque Rating
                83 Nm
                   83 Nm
The insulator are suitable for accepting both aluminium and copper conductors having cross-sectional areas ranging from 35mm2 to 265mm2. The insulators are designed for mounting on the angle and channel crossarms specified in Specification E14
All exposed ferrous part shall be treated against corrosion. Treatment by hot dip galvanizing is preferable.
Send your message to this supplier
Ms. Julie
To: Ms. Julie

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now