Gold Member Since 2015
Audited Supplier

Loadbreak Cutout, Arc Chute Type, Interrupter manufacturer / supplier in China, offering Loadbreak Cutout with Arc Chute Type Interrupter, Yh10W-45, Sharp Head 45kv 10ka Surge Arrester, Yh5w-30, 30kv 5ka Surge Arrester and so on.

(/ )

Supplier Homepage Product High-voltage distribution fuse cutouts Loadbreak Cutout with Arc Chute Type Interrupter

Loadbreak Cutout with Arc Chute Type Interrupter

FOB Price: US $11 / Piece
Min. Order: 1 Piece
Min. Order FOB Price
1 Piece US $11/ Piece
Get Latest Price
Production Capacity: 100000
Transport Package: Cartons Pallets Wooden Case
Payment Terms: L/C, T/T, D/P

Request a custom order and have something just for you!

Send Customized Request
Basic Info
  • Model NO.: L-11
  • Type: Distribution
  • Shape: Circle
  • Fusing Device: Fuse Link
  • Trademark: OEIpower
  • Origin: China Nanyang
  • Breaking Capacity: High
  • Usaga: High Voltage
  • Fusing Speed: T K
  • Standard: IEC IEEE
  • Specification: IEC IEEE
  • HS Code: 85351000
Product Description

The Fuse Cutout type DHE was developed to operate in overhead distribution systems rated at 12-15 kV and 15-27,kV or 27-38 kV grounded systems with 100 or 200 A nominal currents.
Especially designed to protect transformers, capacitors, cables or lines.
It is robust construction, made of rigorously tested material, will interrupt all faults under the
most severe conditions, maintaining mechanical and electric characteristics.
The inserts, hardware and structural bolts and nuts are made from heavy galvanized steel.
The Fuse Cutout type OEI PRW can be applied on all three-phase system rated at or below the maximum operational rating of the cutout. In highly polluted environments or environments with high levels of salinity, a cutout may be used with a higher nominal rating than
that of the system where it is being installed, where the insulator will have a greater leakage distance to ground, allowing for
increased safety against discharge. For an even better protection against abrasions, the hardware may be supplied in stainless
steel. The fuse cutout type MZ has attachment hooks in aluminum.
The Fuseholder has a stainless steel flipper, which associated with a spring doesn't allow the fuse link to be subject to traction
forces of over 3 Kgf, especially during closing. This me chanism also allows for high speed fuse link separation. The fuse cutout
type OEI PRW allows for the insertion of the fuse tube in a precise man ner and always in perfect alignment, due to the large distance
between the grunion pocket. Lower contact, silver-to-silver, provide du el current path, independent of hinge pivot. Stainless-steel
back-up springs prevent arcing when tube rises in hinge during recoil. The fuse cutout type OEI PRW may be transformed into a DI
CONNECT up to 300 A, by simply changing the fuse tube for an electrolytic copper blade.
The DHE Fuse Cutouts conform to ANSI and IEC standards, with independent tests performed At:
CPRI Always use quality fuse links. Only they can assure excellent performance.
Performance Characteristic
Applied standardIEC60282-2
Catalog number
Nominal system voltage kV11
Rated Frequency Hz50
Rated m aximum(design) voltage12
Rated Continuous current A-RMS100
Rated Interrupting current asymmetrical/symmetrical A-RMS12000/8000
BIL 1.2x50 µs kV-peak125
Minimum critical impulse flashover voltage(CFO)KV peak140
Dry withstand voltage kV-RMS42
Wet withstand voltage kV-RMS36
Creepage distance to group Min.mm372
Minimum creepage factor of insulator (Creepage Distance/arcing distance)N/A

Send your message to this supplier
Mr. Samuel Wang
To: Mr. Samuel Wang

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now

Find Similar Products By Category