Jbt Series Parallel Groove Clamp Bimetallic Aluminium Copper Brass Pg Clamp

• Customization: Available
• Technics: Welding
• Standard: GB
• Model NO.: JBT 2
• Usage: Substation Fittings, Line Fittings
• Type: Tension Clamp
• Material: Aluminium
• Surface: Hot-DIP Galvanized
• Types: Bimetal Pg Clamp
• Application: Heavy Duty Pipe Clamp
• Transport Package: Cartons Pallets Wooden Case
• Specification: IEC IEEE
• Trademark: OEIpower
• Origin: China Nanyang
• HS Code: 73269090
• Production Capacity: 100000
• Package Size: 50.00cm * 46.00cm * 50.00cm
• Package Gross Weight: 2.000kg

Product Description

Aluminum parallel groove clamps for tap-off

• 
  
  Aluminum parallel groove clamps for tap-off connection of Al ACSR conductor.
  Ratings

  ETIM class Branch terminal Mechanical Tightening torque 20 Nm Dimensions
  Main conductor mm² Al 16-120 Branch conductor mm² Al 16-120
  Features

  Bolt 2xM8 Certificate Standards IEC 61238-1

The Fuse Cutout type OEI was developed to operate in overhead distribution systems rated at 11
kV to 38 kV grounded systems with 100 or 200 A nominal currents.
Especially designed to protect transformers, capacitors, cables or lines.
It is robust construction, made of rigorously tested material, will interrupt all faults under the
most severe conditions, maintaining mechanical and electric characteristics.
The inserts, hardware and structural bolts and nuts are made from heavy galvanized steel.
The Fuse Cutout type OEI can be applied on all three-phase system rated at or below the maximum
operational rating of the cutout.

Product	D  Bracket
Test Items	Test Content	Test Result
		Sample 1	Sample  2	Sample  3	Sample 4	Sample 5	Remarks
Visual  Inspection	Crack	√	√	√	√	√	1)      Passed Mark"√" 2)  Not Passed Mark"×" Test Conclusion:
	Stoma Trachoma	√	√	√	√	√
	Fins	√	√	√	√	√
	Burr	√	√	√	√	√
Galvanizing thickness	μm	√	√	√	√	√	1)      Passed Mark"√" 2)      Not Passed Mark"×": Test Conclusion:
Mechanical Characteristics	Mechanical Load	√	√	√	√	√	1)Passed Mark"√" 2)Not Passed Mark"×" Test Conclusion:
Inspector	Date:  02. March,2011                        Approved: