Polymer Fuse Cutout, Drop out Fuses 33kv 200A

• Customization: Available
• Breaking Capacity: High
• Type: Distribution
• Model NO.: PRW-33/200
• Usage: High Voltage
• Shape: Circle
• Fusing Speed: T K
• Fusing Device: Fuse Link
• Standard: IEC IEEE
• Rated Current: 100-200A
• Leakage Distance: 25-31mm/Kv
• Material: Porcelain
• Fuse Tube Material: Fiber Glass
• Transport Package: Cartons Pallets Wooden Case
• Specification: IEC282-2 IEEEc37-41
• Trademark: OEIpower
• Origin: China Nanyang
• HS Code: 85351000
• Production Capacity: 100000
• Package Size: 60.00cm * 50.00cm * 15.00cm
• Package Gross Weight: 6.000kg

Product Description

 TYPE "OEI" "PRW" STANDARD CUTOUT DISTRIBUTION TECHNICAL SPECIFICATION
The Fuse Cutout type DHE was developed to operate in overhead distribution systems rated at 12-15 kV and 15-27,kV or 27-38 kV grounded systems with 100 or 200 A nominal currents.
Especially designed to protect transformers, capacitors, cables or lines.
It is robust construction, made of rigorously tested material, will interrupt all faults under the
most severe conditions, maintaining mechanical and electric characteristics.
The inserts, hardware and structural bolts and nuts are made from heavy galvanized steel.
The Fuse Cutout type OEI PRW can be applied on all three-phase system rated at or below the maximum operational rating of the cutout. In highly polluted environments or environments with high levels of salinity, a cutout may be used with a higher nominal rating than
that of the system where it is being installed, where the insulator will have a greater leakage distance to ground, allowing for
increased safety against discharge. For an even better protection against abrasions, the hardware may be supplied in stainless

steel. The fuse cutout type OEI PRW has attachment hooks in aluminum.
The Fuseholder has a stainless steel flipper, which associated with a spring doesn't allow the fuse link to be subject to traction
forces of over 3 Kgf, especially during closing. This me chanism also allows for high speed fuse link separation. The fuse cutout
type OEI PRW allows for the insertion of the fuse tube in a precise man ner and always in perfect alignment, due to the large distance
between the grunion pocket. Lower contact, silver-to-silver, provide du el current path, independent of hinge pivot. Stainless-steel
back-up springs prevent arcing when tube rises in hinge during recoil. The fuse cutout type OEI PRW may be transformed into a DICONNECT up to 300 A, by simply changing the fuse tube for an electrolytic copper blade.
The DHE Fuse Cutouts conform to ANSI and IEC standards, with independent tests performed At:
CPRI Always use quality fuse links. Only they can assure excellent performance.

Rated Voltage	27-33kV
Material of Fuse Support	Porcelain
Interrupting Current (Asym.)	6kA
BIL(Phase to Ground / Phase to Phase)	170kV / 180kV
Power-frequency Withstand Voltage to Earth (1min)	70kV
Power-frequency Withstand Voltage Phase to Phase (1min)	80kV
Creepage Distance	660mm
Standard	IEC 60282-2,ANSI C37.41,ANSI C37.42
Class	Distribution Class
MEMA Type Mounting Brackets	Couple with or not (As per clients' request)
Arc-shortening Rod	Couple with or not (As per clients' request)
Fuse Link	Couple with or nor (As per clients' request, please indicate the fuse link rating of need)
Material of Fuse Tube	Fiber Glass
Material of Contacts	Red Copper with Silver Plating
Material of Casting	Brass (or bronze as per clients' request)
Material  of Terminals	Brass with Silver Plating (or others like tin, as per clients' request)
Terminal Type	Parallel groove type ( or eyebolt type, as per clients' request)
Other Material	Hot-dipped Galvanized Steel. Stainless Stell 304
Pachage Standard	Carton and Pallet