Hubei, China
Business Type:
Manufacturer/Factory & Trading Company
Business Range:
Auto, Motorcycle Parts & Accessories, Construction & Decoration, Electrical & Electronics, ...
Management System Certification:
OHSAS18001:2007, ISO 9001: 2015 Certificate, ISO 14001:2015 Certificate
OEM/ODM Service
Sample Available

Disconnector Switch, Rotary Switch, Switch Disconnector manufacturer / supplier in China, offering 34.5/0.433kv, 315kVA Pole Mounted Distribution Transformer, Polymer Fuse Cutout, Drop out Fuses 21 Kv 300A, Fuse Cutout, Drop out Fuses 11kv 300A and so on.

Gold Member Since 2015
Audited Supplier
Supplier Homepage Products Switchs Isolator 34.5/0.433kv, 315kVA Pole Mounted Distribution Transformer

34.5/0.433kv, 315kVA Pole Mounted Distribution Transformer

Get Latest Price
Min. Order / Reference FOB Price
1 Piece US $11/ Piece
Port: Wuhan, China
Production Capacity: 7000
Payment Terms: L/C, T/T, D/P
Type: High-voltage
Structure: Three-column Disconnector
Installation: Outdoor High-voltage
Operation: Manual
Grounding Mode: Grounding
Movement Mode: Horizontal Rotary Type

You Might Also Like

Loading...

Basic Info

Model NO.
34.5/0.433kV
Number of Poles
Three Pole
Grounding
Single Ground
Series
Three
Run
Turn the Horizontal
Common Model
Ist
Structure of Operating
Manual
Certification
IEC IEEE
Brand
Oei Power
Trademark
OEI Power
Transport Package
Wooden Case
Specification
IEC IEEE
Origin
China Nanyang
HS Code
8535309000
Center Break Isolator and double Break Isolator
34.5/0.433kv, 315kVA Pole Mounted Distribution Transformer
 
These disconnectors are , no load switching devices
which physically isolate the lines. They are designed for
horizontal outdoor application and can also be designed
for vertical installation. For earthing and closing of
switchyard portions of the installation, the earthing
switches are provided on disconnector. If required.
The following documents were referred to during the preparation of this specification. In case of conflict, the provisions of this specification shall take precedence.
IEC 129:1975: Alternating Current Disconnectors (Isolators) and Earthing Switches
IEC 60694:2002: Common Specifications for High Voltage Switchgear and Controlgear
BS 729: Hot dip galvanized coating on iron and steel articles
IEC62271-102
Isolator (Disconnector) - a mechanical switching device which provides, in the open position, an isolating distance in accordance with Electrical Safety requirements.

SERVICE CONDITIONS
The isolator shall be suitable for continuous operation outdoors in tropical areas at altitudes of up to 2200m above sea level, humidities of up to 90%, average ambient temperature of +30ºC with a minimum of -1ºC and a maximum of +40ºC and heavy saline conditions along the coast.

4.2. DESIGN AND CONSTRUCTION
4.2.1 The Isolator, Solid Link shall be designed and constructed in accordance with IEC 129 and IEC 60694.
4.2.2 The isolating link shall be of the vertical opening, designed for single phase manual operation. It shall be easily removed and replaced by using a portable operating rod.
4.2.3 The isolating link shall incorporate double porcelain insulators to suit voltage requirements and mounted on hot dipped galvanised steel under base suitable for vertical mounting.
4.2.4 The isolating link shall be arranged so that each unit is mounted independently on an angle bracket. It shall be supplied complete with the angle bracket and accessories suitable for mounting on 'U' type steel channel. The drawings to be submitted shall indicate all the applicable mounting positions.
4.2.5 The isolator shall be designed such that in fully open position, it shall provide adequate electrical isolation between the contacts on each phase. It shall conform to the requirement as single point isolation for safety.
4.2.6 All steel parts shall be hot dip galvanized to BS 729. The minimum coating of galvanizing required is 80 microns.
4.2.7 The solid link shall be removable from the mounting by use of operating rod.
4.2.8 All current carrying parts of the isolator shall be made of high conductivity material.
4.2.9 The isolator shall be fitted with clamp connectors for Aluminium (ACSR) conductor of Aluminium (ACSR)conductor of up to 18.2mm diameter.

The rating of the complete isolator shall be as follows: -
Rated voltage
36 kV
Rated frequency
50 Hz
Rated lightning impulse withstand voltage
200 kV
Rated power frequency withstand voltage, dry
95 kV
Rated normal current
400 Amps
Rated short time withstand current for 3 sec, min.
18.0 kA
Minimum creepage distance of insulators
900 mm
 
 

Send your message to this supplier

*From:
*To:
avatar Mrs. Catharine Cheng
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now