Nll-3 Aluminum Dead End Clamp for ACSR Conductor Compression Type

• Customization: Available
• Standard: GB
• Usage: Substation Fittings, Line Fittings
• Model NO.: NLL-3
• Type: Pull-Line Fitting
• Related Name: Anchoring/ Strain Dead End/Wedge Strain Clamp
• Useage: Anchor/ Suspension/Insulation Strain Clamp
• Classification: Bolt/ Cable/ Anchoring/ Tube/ Wire Clamp
• Material: Aluminum Alloy Die Cast
• Cable Clamp: Strain Clamp Fitting/Cable Dead End Clamp
• Surface: Galvanized
• Galvanization Type: Hot-DIP Galvanized
• Transport Package: Wooden Case
• Specification: IEC IEEE
• Trademark: OEI Power
• Origin: China Nanyang
• HS Code: 8535309000
• Production Capacity: 7000
• Package Size: 40.00cm * 20.00cm * 30.00cm
• Package Gross Weight: 2.000kg

Product Description

The clamp body and jumper clamp are aluminium, the other parts are hot-dip galvanized steel.

  

NLL Strain Clamp Overhead Power Line Cable Accessory Cable Strain Tension Clamp

The products are widely used in transmission and distribution lines of electrical energy, optical cable lines and high-speed railway lines. Bolt type aluminum alloy tension clamp is used for non load-bearing connection fittings of distribution system, connection of aluminum strand or steel core or aluminum strand, connection between aluminum strand and copper strand, and connection between copper strand in non seriously polluted areas.

It is designed for aerial lines up to 30kV.
1) Be suitable for fixing insulated aluminum conductor or naked aluminum conductor on the rotate angle or insulator of terminal strain pole, to fix and tighten the aerial conductor.
2) Material: body, keeper - aluminum alloy, split pin - stainless steel, others - hot-dip galvanized steel.
3) Grip strength of the clamp is more than 95% break strength of the conductor.
4) Insulation cover and strain clamp used together for insulation protection
Structural features:
1. The clamp body is made of high-strength aluminum alloy;
2. Smooth appearance and long service life;
3. Easy to install and use with spanners
4. It has no power loss and is an energy-saving certified product.
OUR PRODUCING PROCESS:
 1. Tooling (Mold) design and Manufacture.
 2. Manufacture the parts according to the Stamping Machine.
 3. Riveting, Welding or Screw tap according to Customer's require.
 4. After finish manufacture process we will test the parts by the Image measurement instrument, Caliper, 
 Angel Gage etc.
 5. After make sure all the dimension can reach customer's require, we will make the surface treatment process.
 6. After finish surface treatment we will testing all the parts by worker so that we can make sure the parts which 
 we sell is 100% qualified.
 7. After finish testing we will pack the parts by Vacuum Package Machine.

Specification

Catalog No.	Conductor Dia.  (mm)	Dimensions (mm)				Breaking Load (KN)	Weight (kg)
		M	C	L1	L2
NLL-1	5.1-11.5	16	19	140	120	40	1.0
NLL-2	8.9-18.5	16	24	176	187	40	1.6
NLL-3	5.0-15.0	16	18	310	160	70	1.9
NLL-4	12.1-21.8	16	30	298	284	90	4.1
NLL-5	18.0-30.0	22	36	446	342	120	7.0
NLL-6	27.0-38.0	22	44	560	360	120	8.1
NLL-2A	7.0-16.0	16	20	111	137	40	1.6
NLL-4A	12.0-21.8	16	30	298	292	102	3.9
NLL-5A	18.0-30.0	16	32	190	235	70	3.9
NLL-6A	27.0-38.0	16	36	296	255	70	4.0