Connector Attacked Perforation Bt 1/0-2, Two Gone out

• Customization: Available
• Technics: Injection Molding
• Standard: IEEE ANSI
• Usage: Line Fittings
• Type: Suspension Clamps
• Transport Package: Carton
• Specification: 30
• Trademark: OEI
• Origin: China

Product Description

3	Catalog and manufacturer reference code		Specify code and attach technical catalog of the model proposed by the manufacturer
4	Connector name		Pressure wedge connector 336.4  MCM with stirrup
5	Rules		ANSI C119-4, ASTM 153
6	Quality certificate		ISO 9001
7	Manufacturing raw material External envelope:		Aluminum alloy, bimetallic
8	Inner wedge		Aluminum alloy
9	Stirrup		Tinned copper
10	Driver	MCM	336.4
11	Section	mm²	170.5
12	Stirrup	AWG	2/0
13	Size of the gun needed		Big
14	Color of the cartridge		Yellow
	Characteristics
15	DN-DS certificate		Attach certificate of  acceptance and approval
16	Identification mark		Each connector should be  marked on the body with the Manufacturer's symbol, catalog number, application conductor ranges and die number to occupy with the hydraulic tool for installation
17	Packing		The connectors must be in a package that indicates on the outside the range of application and prevent external agents from damaging it and causing premature oxidation.

Connector Perforation 2/0-336 / #8-#2
 

Material name		Drill connector 2/0 -336.4  MCM at 8 -2 AWG,
Applied standards		ANSI C 119.4, ASTM G155, ASTM B117, IRAM 2435, NFC 33-020
Quality certificate		ISO-9001 or recent
Approval certificate		Attach DN-DS acceptance certificate
Constructive features
Type of connector		The connector will be mechanically adjusted by means of adjusting head bolts that thread on a lower nut
Connector model class		All the models must be of independent tightening for the connections of line and connection, facilitating in this way a possible connection-disconnection of the connection by means of fixing the connection d elinea
Tightening system form		The tightening system will be double  nut, so that when you break the first (mechanical fuse) when making the initial connection, it can be disconnected by the second nut
Body		Thermoplastic synthetic material reinforced with fiberglass, with UV protection
Isolating material.		Neoprene
Tooth		Aluminium alloy
Preformed material		Synthetic (polyamide with FV)
Cap and seal  insulators		Elastomeric thermoplastic
Inhibitory compound		Synthetic grease without drip point consistency grade NLGI3
Bolt through  hexagonal head		Galvanized steel by immersion in  hot
Type of tightening		Simultaneous
Permissible section range
Valid section of the main conductor	mm²	67 to 170
Valid section of the  secondary driver	mm²	8 to 35
Drivers
Main driver	AWG/MCM	2/0 - 336. 4
Driver bypass	AWG	8-2
Mechanical characteristics
Stress level  permissible in the test of dielectric control and water tightness defined by NFC 33-020.	kV	6
Torque		25
Electric characteristics
Maximum intensity	A	370
admissible principal	A	150
Maximum intensity  short-circuit admissible in the main (time 1 second	A	15857
Maximum intensity  short-circuit admissible in the derivative (time 1 second)	A	3162
Quantity of output
Color		Black
Identification mark		Each connector must present the brand or symbol of the manufacturer and the range of application
Packaging		Each connector must be packed in transparent plastic bag, on this bag the range must be engraved  of application and name of the material. The group of connectors must be packed in a highly resistant cardboard box for transport, handling and storage. Each box must present a label indicating the name of the manufacturer, country and quantity

 

4	Material name		Connector Drilling 2-6 to 2-6
5	Preformed material	steel	Synthetic (polyamide with FV)
6	Isolating material.		Neoprene
7	Applied standards		NFC 33-020, UNE 21 021
8	Quality certificate		ISO-9001 or recent
9	Certificate of  homologation		Attach acceptance certificate  DN-DS
	Characteristics
10	Body material		Thermoplastic reinforced with fiberglass with high mechanical resistance and weathering.
11	seal		elastomer with high dielectric strength and weather resistance
12	Drilling teeth		tinned electrolytic copper
13	Stainless steel bolts		Protected against corrosion and special anti-abrasion treatment (1).
14	Removable cap		Safety pin for the derivative cable in elastomeric material with high dielectric strength and resistance to weathering.
15	Material main line		Copper or aluminum isolated
16	Material line derivation		Copper or allylated aluminum
	Characteristic
	Dielectric sealing submerged in water	kV	6
	Connection of drivers		It is carried out simultaneously on the main conductor and on the derivative by hexagonal fuse head screws.
	Type of tightening		Simultaneous
	Body		Synthetic material
	Teeth		Aluminum alloy
	Pieces		Galvanised steel
	Galvanized		Conforming to ASTM standard A 153
	characteristics
	Torque	daN‐m	25
12	Main conductor section	mm2	2-6
13	Driver Section  derivation	mm2	2-6
14	Departures	U	2
15	Voltage	V	600
17	Identification mark		Each drilling connector must present the manufacturer's mark or symbol and the range of application
18	Packaging		It must be packed in a cardboard box of high resistance, each connector must be wrapped in a transparent plastic bag, on the bag must present the technical data

5	Preformed material	steel	Synthetic (polyamide with FV)
6	Isolating material.		Neoprene
7	Applied standards		NFC 33-020
8	Quality certificate		ISO-9001 or recent
	characteristics
9	Type of tightening		Simultaneous
10	Body		Synthetic material
11	Tooth		Aluminium alloy
12	Pieces		Galvanised steel
	characteristics
13	Valid section	mm²	56
14	Torque	daNm	25
15	Main driver	AWG	1/0
16	Secondary conductor	AWG	1 / 0-6
17	Departure		1
18	DN-DS certificate		Attach certificate of  acceptance and approval
19	Identification mark		Each drilling connector must present the manufacturer's mark or symbol and the range of application
20	Packaging		It must be packed in a cardboard box of high resistance, each connector must be wrapped in a transparent plastic bag, on the bag must present the technical data

OVERHEAD PRIMARY TAPS STIRRUP CLAMPS ALUMINUM,For aluminum or ACSR conductor. Eyestem is at 30º angle from the stirrup.
 

4	Material name		Connector Drilling open network
5	Preformed material	steel	Synthetic (polyamide with FV)
6	Isolating material.		Neoprene
7	Applied standards		NFC 33-020, UNE 21 021
8	Quality certificate		ISO-9001 or recent
9	Certificate of  homologation		Attach acceptance certificate  DN-DS
	Characteristics
10	Body material		Thermoplastic reinforced with fiberglass with high mechanical resistance and weathering.
11	seal		elastomer with high dielectric strength and weather resistance
12	Drilling teeth		tinned electrolytic copper
13	Stainless steel bolts		Protected against corrosion and special anti-abrasion treatment (1).
14	Removable cap		Safety pin for the derivative cable in elastomeric material with high dielectric strength and resistance to weathering.
15	Material main line		Copper or aluminum isolated
16	Material line derivation		Copper or allylated aluminum
	Characteristic
	Dielectric sealing submerged in water	kV	6
	Connection of drivers		It is carried out simultaneously on the main conductor and on the derivative by hexagonal fuse head screws.
	Type of tightening		Simultaneous
	Body		Synthetic material
	Teeth		Aluminum alloy
	Pieces		Galvanised steel
	Galvanized		Conforming to ASTM standard A 153
	characteristics
	Torque	daN‐m	25
12	Main conductor section	mm2	22-150
13	Driver Section  derivation	mm2	4-50
14	Departures	U
15	Voltage	V	600
17	Identification mark		Each drilling connector must present the manufacturer's mark or symbol and the range of application
18	Packaging		It must be packed in a cardboard box of high resistance, each connector must be wrapped in a transparent plastic bag, on the bag must present the technical data